PTZ Keyboard Controller User Manual

# PTZ Keyboard Controller User Manual

## Introduction

The PTZ Keyboard Controller is a professional device designed to manage and control Pan-Tilt-Zoom (PTZ) cameras with precision and ease. This user manual provides detailed instructions on how to set up, operate, and troubleshoot your PTZ Keyboard Controller for optimal performance.

## Features

– Intuitive button layout for easy navigation
– Support for multiple PTZ camera protocols
– Joystick for smooth pan, tilt, and zoom control
– Programmable preset positions
– LCD display for status monitoring

## Setup Instructions

### 1. Unboxing and Inspection

When you first receive your PTZ Keyboard Controller, carefully inspect the package for any signs of damage. The standard package should include:

• PTZ Keyboard Controller unit
• Power adapter
• RS-232/RS-485 connection cable
• User manual

### 2. Connecting the Controller

Follow these steps to connect your controller:

1. Connect the power adapter to the controller and plug it into a power outlet
2. Use the RS-232/RS-485 cable to connect the controller to your PTZ camera
3. Power on both the controller and the PTZ camera

## Basic Operation

### Controlling Camera Movement

The joystick allows for precise control of your PTZ camera:

• Push the joystick left/right to pan the camera
• Push the joystick up/down to tilt the camera
• Use the zoom buttons to adjust the camera’s zoom level

### Setting Preset Positions

To save a preset position:

1. Move the camera to your desired position using the joystick
2. Press the “Preset” button
3. Select an available preset number (1-128)
4. Press “Save” to store the position

## Advanced Features

### Protocol Configuration

The controller supports multiple PTZ protocols. To change the protocol:

1. Press the “Menu” button
2. Navigate to “Protocol Settings”
3. Select your camera’s protocol from the list
4. Press “Save” to confirm

### Camera ID Assignment

When controlling multiple cameras:

1. Access the “Camera Settings” menu
2. Select “Camera ID”
3. Assign a unique ID to each camera
4. Use the ID selector on the controller to switch between cameras

## Troubleshooting

### Common Issues and Solutions

Controller Not Powering On

Check the power connection and ensure the adapter is properly plugged in. Try a different power outlet if necessary.

Camera Not Responding

Verify that:

• The communication cable is properly connected
• The correct protocol is selected
• The camera ID matches between controller and camera

Joystick Not Functioning

Try recalibrating the joystick through the controller’s settings menu. If the issue persists, contact technical support.

## Maintenance

To ensure long-term performance:

• Keep the controller clean and free from dust
• Avoid exposing the unit to extreme temperatures or moisture
• Store in a dry place when not in use
• Periodically check all connections for wear or damage</